Project Display

Source of raw water: Reservoir water and tap water
Water quality problem: Scale exists
Customer requirements: Scale needs to be removed to ensure the normal operation of the boiler without scaling
Solution: Use a 20-ton double-valve double-tank softened water parallel system and dosing device
Customer feedback: The equipment has been installed, the water quality meets the standards, and the operation is stable. The customer has successfully connected the boiler and achieved normal use.

Source of raw water: Reservoir water
Water quality challenge: Presence of silt and scale
Customer requirements: Need to disinfect, filter impurities, and remove suspended solids
Solution: Use a combination of self-cleaning filter, laminated filter, high-flow filter, and sodium hypochlorite generator
Customer feedback: The equipment has been installed, the water output is stable, the water supply is running normally, and all indicators have met the standard requirements.

Source of raw water: tap water
Water quality challenge: impurities and scale problems
Customer demand: need to solve the scaling problem in air conditioning and refrigeration system
Solution: provide PLC-controlled quartz sand filter and two-stage softening water equipment with all stainless steel structure
Customer feedback: The equipment installation has been completed, the water output is stable, and all water output data meet the standards. The customer has now started normal production.

Source of raw water: Slaughterhouse wastewater
Water quality problem: COD and BOD indicators of slaughterhouse wastewater do not meet the standards and cannot be directly discharged into the pipe network
Daily treatment capacity: 30 tons of wastewater are treated daily
Customer demand: According to relevant environmental protection regulations, slaughterhouse wastewater must be treated before it can be discharged into the pipe network
Solution: Introduce a combination of a flotation machine and integrated wastewater treatment equipment
Customer feedback: The equipment has been successfully installed and put into use, and the effluent quality meets the standards of the discharge pipe network.

Source of raw water: Reservoir water
Water quality issues: Sediment impurities and bacterial contamination in the water
Customer demand: Daily water consumption is 200 tons
Solution: A comprehensive treatment system using 40 tons of quartz sand filter, activated carbon filter, precision filter, and ultraviolet filter
Customer feedback: The treated water is clean and clear, meeting the standards, and the farmed ducks did not have diarrhea after drinking it.

Source of raw water: process recycled water
Water quality problem: high salt water
Customer demand: 80 tons of intermediate high-salt wastewater that needs to be treated and reused in production every day
Solution: Use RO reverse osmosis system for efficient treatment
Customer feedback: Party A has completed a one-time acceptance, the equipment is running stably, and the effluent water quality meets the standard requirements.

Source of raw water: groundwater
Water quality problem: scale in the water causes watermarks after cleaning stainless steel parts
Customer demand: The cleaning water used to produce stainless steel parts must ensure the brightness and metallic luster of the parts after cleaning
Solution: Configure a 1 ton per hour two-stage reverse osmosis system, EDI (electrodeionization device), and polishing resin to produce 18.25 megohm ultrapure water that meets the requirements
Customer feedback: The equipment has been installed, the water output is stable, and the water quality meets the standards. The customer has now put it into normal production.

Source of raw water: groundwater
Water quality problem: The iron and manganese content in the water exceeds the standard, and there are mud and sand impurities
Customer demand: The well water is yellow-brown and contains impurities, and the daily water consumption is 600 tons
Solution: Configure a 60 tons/hour manganese sand filter and an activated carbon filter for water quality treatment
Customer feedback: The treated water is clear and transparent, without impurities, and the water quality is stable and meets the use requirements.

Source of raw water: tap water
Water quality problem: Municipal water quality is good and needs to be further treated to meet specific standards
Customer needs: The customer is engaged in cosmetics production and has extremely high requirements for water quality, which needs to meet ultrapure water standards
Solution: Use a 1-ton-per-hour bipolar reverse osmosis device combined with EDI (electrodeionization device) for water treatment

Raw water source: groundwater
Water quality issues: water has high hardness and contains impurities
Customer demand: The customer needs to treat water sources for air energy systems, cooling circulating water, and domestic water. The daily water consumption is about 800 tons.
Solution: Configure 50 tons/hour softened water equipment (main and backup, one in use and one in backup), and install a pre-filter
Customer feedback: The equipment has been successfully installed, and the water output test results show that it is soft water. The effect is significant and the water output is stable.

Raw water source: groundwater
Water quality problems: high sediment content, significant suspended impurities, and relatively turbid water quality
Customer demand: The domestic water supply in hospitals is affected by aging and clogged pipes, and the water quality needs to be improved urgently.
Solution: Configure 6 tons/hour quartz sand filter, 6 tons/hour softened water equipment, and precision filter for comprehensive treatment
Customer feedback: The effluent water quality meets the standard requirements and is clear and transparent without impurities.

Raw water source: groundwater
Water quality problems: nitrate content exceeds the standard, water hardness is high, and turbidity exceeds the standard
Customer demand: The customer focuses on the production of milk powder and has extremely strict salt requirements for production water. It mainly needs to remove nitrates and nitrites. The daily water consumption is about 60 tons.
Solution: Use 6 tons/hour of all-stainless steel single-stage reverse osmosis equipment for water quality treatment
Customer feedback: The content of nitrate and nitrite in the effluent is stable below 0.01 mg/L. The treatment effect is significant and the quality of the effluent is stable.

Raw water source: groundwater
Water quality issues: The hardness of groundwater is high and the content of calcium and magnesium ions exceeds the standard.
Customer demand: The well water hardness is too high and the scale is severe, causing water problems in the washing plant. The linen becomes hard and yellow after washing. The daily water consumption is about 150 tons.
Solution: Configure 20 tons/hour of fully automatic softened water equipment (main and backup, one in use and one in backup)
Customer feedback: The quality of the effluent water has reached the soft water standard, the effect is remarkable and the water output is stable

Source of raw water: Well water in the mining area
Water quality problem: The salt content in the water is high, and there is also a problem of excessive heavy metals
Customer demand: The water volume to be treated is 80 cubic meters/day, supplying domestic water for surrounding factories and villagers
Treatment requirements: Water quality must meet domestic water standards
Recommended equipment: High-efficiency desalination reverse osmosis equipment

Source of raw water: underground water from mines
Water quality issues: high total dissolved solids (TDS) value, poor water quality, and corrosion to water-using equipment
Customer needs: 50 tons of water to be treated per day, mainly for equipment water, and the need for direct drinking water in the kitchen needs to be considered in the later stage
Treatment requirements: effectively remove ionic substances in water, reduce TDS value, and protect the safety and service life of water-using equipment
Recommended equipment: 5 tons/hour reverse osmosis pure water equipment

Source of raw water: groundwater
Water quality problem: turbid water, high sediment content
Customer demand: 6 tons of water to be treated per hour
Treatment requirements: filter impurities, ensure clear water quality, and remove scale
Recommended equipment: 6 tons/hour four-stage filtration system, using quartz sand active agent fine softening and pipeline ultrafiltration technology

Source of raw water: groundwater
Water quality problem: Iron and manganese content seriously exceed the standard
Customer demand: 30 cubic meters/hour of water to be treated
Treatment requirements: Effectively reduce the content of iron and manganese to meet the standard of domestic water
Recommended equipment: two-stage manganese sand filter, activated carbon filter, and ozone aeration system

Source of raw water: groundwater well water
Water quality problem: high sediment content in the water, and the water quality is yellow
Customer demand: The water used in the mixing station has a high hardness, which affects the strength of the concrete. At the same time, the water quality of the migrant workers in the work area is poor and cannot meet the use requirements. After filtration, it must meet the tap water standard
Recommended equipment: 100 tons/hour water treatment system (including quartz sand filter, activated carbon filter, and softening water equipment)

Source of raw water: tap water and river water
Water quality problems: Because the raw water is mixed with tap water and river water, the water quality is turbid, the hardness is high, and the scale is severe, causing the water used for power generation to be unqualified. This results in a significant increase in boiler energy consumption, increased use risks, and failure to meet boiler water standards. It is now necessary to carry out reverse osmosis filtration of power generation water to meet pure water standards, thereby extending the service life of the boiler, effectively solving the problem of boiler scale, and reducing energy consumption.
Solution: Configure 120 tons/hour reverse osmosis pure water equipment

Source of raw water: underground deep well water
Customer demand: This project involves indoor soilless cultivation. The conductivity (EC value) of the raw water is high, and the salt content is too high, which affects the absorption of organic fertilizers, causing yellowing of plant leaves and water loss at the roots, and the water quality becomes salty and bitter. At present, single-stage reverse osmosis (RO) filtration technology has been adopted, which is mainly used to remove minerals from water. The treated water conductivity is 20 µS/cm, which is suitable for organic fertilizer application.
Equipment configuration: 12 tons/hour single-stage reverse osmosis water treatment system (including quartz sand filter, activated carbon filter, precision filter, RO reverse osmosis membrane, chemical cleaning system, and PLC intelligent control system)